- General (38)
CTI SYMPOSIUM is the place to be for companies, engineers and innovators looking to be in the pole position of international drivetrain development. The CTI SYMPOSIUM provides expert-led plenary and technology sessions as well as expert discus-sions and product showcases representing the full range from complete drivetrain systems to compo-nents and engineering services. It is our priority to deliver a market leading high quality event, be it in presence or digital.
Dytran is a leader in the design and manufacture of innovative sensing solutions for automotive companies around the world. Offering a diverse product line, Dytran specializes in custom high-end sensors, including piezoelectric and VC MEMS accelerometers, 6DoF, dynamic force and pressure sensors, USB accelerometers, and digital bus-based smart sensors. These sensors provide critical measurements to engineers throughout the product design, evaluation, testing, qualification and, acceptance phases of the project.
hofer powertrain is a global development partner of the mobility industry and system-supplier of
the most efficient powertrain solutions for electrified vehicles. For over 40 years we have been
focusing on rapid improvement of the overall vehicle efficiency, boosting performance and
sustainability with electrified technologies, while utilising cutting-edge development strategies,
methods, and tools.
the most efficient powertrain solutions for electrified vehicles. For over 40 years we have been
focusing on rapid improvement of the overall vehicle efficiency, boosting performance and
sustainability with electrified technologies, while utilising cutting-edge development strategies,
methods, and tools.
REWITEC GmbH is a medium-sized company based in Lahnau and has been part of the English chemical group Croda International Plc since 2019.
REWITEC develops, produces and markets innovative oil and grease additives that have a protective and repairing effect on metal surfaces. In addition to surface protection, the technology also reduces friction and therefore temperature in gears, bearings and combustion engines. In this way, the efficiency and service life of the components are significantly increased.
REWITEC develops, produces and markets innovative oil and grease additives that have a protective and repairing effect on metal surfaces. In addition to surface protection, the technology also reduces friction and therefore temperature in gears, bearings and combustion engines. In this way, the efficiency and service life of the components are significantly increased.
Amsted Automotive design, engineer, and produce electrified and advanced propulsion systems for top OEMs and hard-charging startups.
We are experts in high efficiency mechatronic clutch designs, electrified torque management systems, advanced metal-forming, powdered metallurgy, soft magnetic composites, precision-bearing components, and engineering and manufacturing.
We are experts in high efficiency mechatronic clutch designs, electrified torque management systems, advanced metal-forming, powdered metallurgy, soft magnetic composites, precision-bearing components, and engineering and manufacturing.
More than 10 years, Yamaha has been one of the leading companies of thermoelectric devices. These devices are widely applied in optical communication net-work field as the well-known Peltier device to control and stabilize temperature of optical laser diode precisely.
Acerta Analytics is empowering automotive data to unlock its value and transform product quality. Our platforms detect the earliest indicators of future product failures, enabling automotive OEMs and Tier 1s to optimize vehicle and part quality, safety and reliability.
Our company was founded in 2014. Our Mission is custom-designing eco-friendly products through simple, effective engineering solutions and be a leader in Automotive-Engineering. We have developed the design for a scalable infinitely variable transmission (IVT) with uniform input to output ratio which is gear based and is not dependent on friction. We have a patent in USA, China and Japan and patent pending in Canada, EPO and India.
BAHMUELLER is ranking - within its three highly specialized business segments - among the market and technology leaders worldwide. With the business unit precision grinding for the automotive industry, the fully automatic production systems for the corrugated board converting industry and the tool holders for automatic machining centers, BAHMÜLLER is claiming a solid and successful international market position.
Valvoline Inc. (NYSE: VVV) is a leading provider of automotive services and marketer and supplier of premium branded lubricants worldwide, with sales in more than 140 countries. Established in 1866, the Company’s heritage spans more than 150 years, during which time it has developed powerful brand recognition across multiple product and service channels.
VisIC Technologies has had a decade of experience in creating, developing, and advancing concepts based on cutting-edge Gallium Nitride (GaN) on silicon technology. Our patented D3GaN technology addresses the automotive industry's needs in terms of cost, supply, sustainability, reliability, quality, and performance.
ECM Technologies started manufacturing heat treatment furnaces in 1928. The mastery of high temperatures, vacuum, and controlled atmospheres has allowed ECM Technologies to offer turnkey solutions for various applications & numerous industries, such as automotive, aeronautics, commercial heat treatment, electronics and renewable energies.
A new £70 million powertrain research and innovation centre is nearing completion in the UK. Led by The University of Bath, the Institute for Advanced Automotive Propulsion Systems (IAAPS) is designed to both accelerate the pace of innovation across companies of all sizes and to increase the supply of engineers with the skills needed to develop the next generation of electrified vehicle powertrains.
PCI Machining designs and manufactures machining solutions for the mass production of automotive parts. The company designs and realizes the machining processes and machines to fit to your parts. PCI Machining has engineered and supplied transfer lines and turnkey production lines throughout its lifelong relationship with automobile parts manufacturers.
Established over 21 years ago, SMT is an international enterprise and a well-respected, global engineering solutions and services provider.
Stackpole International designs and delivers technical solutions for customers around the globe. We combine world-leading expertise in fluid power systems and powder metal technology with world-class product and process engineering to solve our customers’ most difficult challenges. We have earned their trust by honoring our commitments.
International Products Corporation (IPC) offers a unique line of temporary rubber lubricants.
Your partner for planning, development and production of highly precise machines for industrial use for processing of metals and composites.
Idemitsu Lubricants America (ILA) is now the eighth largest lubricant manufacturer globally, with over a century of unsurpassed quality, innovation and superior product development.
In fact, Idemitsu pioneered the original 0W-20 engine oil found in many vehicles on the road today. We’re on the cutting edge of low-viscosity oil development. As automakers look for ways to improve fuel economy and decrease emissions, we work with them to provide the best solutions possible – especially for advanced hybrids or those equipped with “stop-start” technology.
In fact, Idemitsu pioneered the original 0W-20 engine oil found in many vehicles on the road today. We’re on the cutting edge of low-viscosity oil development. As automakers look for ways to improve fuel economy and decrease emissions, we work with them to provide the best solutions possible – especially for advanced hybrids or those equipped with “stop-start” technology.
VOSS Automotive, Inc. is a leading tier one global supplier of innovative line and connection technology for vehicle systems.
TLX Technologies partners with OEMs and Tier 1 system suppliers to meet the challenge of developing new technologies for current and emerging mobility architectures.
FVA Software & Service GmbH works hand-in-hand with top-level German research institutions and leading companies from the drive technology industry toward the practical application of knowledge gained from FVA research projects. Based on more than 50 years of research, their products and services make innovative development processes possible for the advancement of the entire industry.
teamtechnik is part of the Dürr group and is an international market leader
in assembly and functional test systems. With corporate headquarters in Freiberg, Germany, teamtechnik focuses on developing and building special-purpose automation equipment in the field of e-mobility, medical technology and new energy. Founded in 1976, teamtechnik has established multiple design and manufacturing sites globally including Germany, China and the USA.
in assembly and functional test systems. With corporate headquarters in Freiberg, Germany, teamtechnik focuses on developing and building special-purpose automation equipment in the field of e-mobility, medical technology and new energy. Founded in 1976, teamtechnik has established multiple design and manufacturing sites globally including Germany, China and the USA.
Staying ahead in times of transition requires courage and common sense.
We’re offering both. How about you?
ECONAMIQ is a company of levelheaded forward thinkers,
introducing reliable breakthroughs to the transport and energy sector.
We love conventional technologies and unconventional solutions.
We set off to inject new energy into the combustion engine.
Resulting today in the introduction of an industry friendly revolution,
allowing for 20 percent greater fuel efficiency.
We’re offering both. How about you?
ECONAMIQ is a company of levelheaded forward thinkers,
introducing reliable breakthroughs to the transport and energy sector.
We love conventional technologies and unconventional solutions.
We set off to inject new energy into the combustion engine.
Resulting today in the introduction of an industry friendly revolution,
allowing for 20 percent greater fuel efficiency.
PCB Piezotronics was founded in 1967 as a manufacturer of piezoelectric quartz sensors, accelerometers, and associated electronics for the measurement of dynamic pressure, force, and vibration. The unique expertise of the company was the incorporation of microelectronic signal conditioning circuitry within these sensors to make them easier to use and more environmentally compatible.
Since 1857, Associated Spring has been pioneering custom innovative engineered springs & precision solutions for automotive applications, including compression springs, torque converter clutch springs, snap rings, Belleville washers, suspension springs, wave plates, accordion springs, valve bodies, & torsion springs.
Mitsubishi Heavy Industries Machine Tool (MAT) is part of MHI Group and focuses on the design, manufacturing, sales, product installation, technical guidance, after-sales and consulting services for machine tools for various industries from automobiles to robots and aerospace.
Founded in 2010, Coryton has become a global force in the development and supply of bespoke, specialist fuels. Originally built in 2001, Coryton’s site now extends to 2.6 hectares and is situated close to the Thames Estuary.
Silicon Valley-based Tula Technology provides innovative award winning software controls to optimize propulsion efficiency and emissions across the mobility spectrum, including gasoline-powered, diesel, alternative fueled, hybrid, and electric vehicles. Its proprietary dynamic skip fire (DSF®) technology modulates power output by dynamically deciding to fire or skip each cylinder immediately prior to firing and has broad application across all sizes and types of engines.
The cooling of lithium batteries by immersion is regarded as the optimum solution to the challenges posed by ultra-fast charging, with the most powerful charging stations (up to 350kW DC) generating heat fluxes that existing cooling systems struggle to handle.
Car makers and battery manufacturers have been greatly impressed by the performance of this TotalEnergies-developed technology, but a number of question marks mean there are no plans to mass-market it, in the short-term at least.
Car makers and battery manufacturers have been greatly impressed by the performance of this TotalEnergies-developed technology, but a number of question marks mean there are no plans to mass-market it, in the short-term at least.
MAHLE Powertrain provides world class engineering and consultancy services for the global automotive industry. Customers benefit from MAHLE Powertrain's expertise across the entire propulsion field including ICE, EV, Hybrid and Battery Development and Testing.
Robertshaw Controls Company is a global leader in motion and flow control technologies for the transportation industry that includes electric & conventional passenger cars, on-highway, off-highway, construction, agriculture, bus, firetrucks, military vans, medium duty and heavy-duty trucks.
SONCEBOZ core competencies consist of design, development and production of mechatronic drive systems and electric motors that operate in harsh environments.
German based EUtech Scientific Engineering GmbH is a development partner for testing solutions and prototypes of powertrain components and systems, especially for electrical and fuel cell powered vehicles. We offer state-of-the-art turnkey engineering solutions from a single source - at the cutting edge of technology and always with a view to the specific needs of our customers.
Dana is a world leader in providing power-conveyance and energy-management solutions for vehicles and machinery. The company’s portfolio improves the efficiency, performance, and sustainability of light vehicles, commercial vehicles, and off-highway equipment.
IAG-ng is an OEM offering not only sophisticated integrated FTIR measurement technology solutions, guaranteeing the highest levels of reliability, but also any additional technical equipment such as pressure regulators, pre-filters, etc. you may need during exhaust measurements.
Iluka is a global critical minerals company with expertise in exploration, development, mining, processing, marketing and rehabilitation.
Hillcrest Energy Technologies is a clean technology company developing high-value, high-performance power conversion technologies and digital control systems for next-generation powertrains and grid-connected renewable energy systems. From concept to commercialization, Hillcrest is investing in the development of energy solutions that will power a more sustainable and electrified future.
This is the wide range where tectos' engineers and technicians are at home. The company, founded in 2004 by Dr. Dieter Höfler, has developed over the years into an innovative and solution-oriented partner for engineering services and test bench components.
IBS FILTRAN is an American company located in Morsbach-Lichtenberg, about 80 km from Cologne. As a market-leading company in Europe, we supply all automotive and transmission manufacturers with fluid filter systems for combustion engines, hybrid and fully electric drives.
Ionic Mineral Technologies (Ionic MT) is a battery materials manufacturer based in Utah, U.S.A., with a mission to electrify the future with their innovative next-generation nano-silicon, Ionisil™. The company specializes in silicon anode material for lithium-ion batteries which is derived from halloysite, a naturally occurring aluminosilicate mineral.
Flexible Circuit Technologies (FCT) is a premier global supplier of flexible circuits, rigid flex, flexible heaters, membrane switches, plastic moldings and value added SMT assembly, to product module builds, to complete product box builds.
Gleason is a global leader in gear technology. Gleason’s "Total Gear Solutions" range from gear and transmission design software to the development and production of gear manufacturing machines and related accessories, gear metrology equipment and automation systems.
Dontyne Systems offers software aimed at the optimum design, production, and performance of gear systems in the transmission industry. The design aspects of the software allow recognized international standards to be implemented but Dontyne also offers bespoke solutions specific to customer production including analysis of any novel designs permitted by modern CNC capability.
For over 75 years, The Lee Company has pioneered the design and manufacture of miniature precision fluid control components for a wide range of industries such as aerospace, automotive, medical and scientific instrumentation, industrial and off-road/construction. Lee valves, precision flow orifices, safety screens, and Betaplug® expansion plugs are recognized worldwide for outstanding quality, unmatched reliability, and superior performance.
Agile and flexible, TREMEC easily responds to industry and customer needs by innovating torque transfer solutions that enhance vehicle performance and the driving experience. Technologically advanced in the development and production of transmissions and subsystems for conventional, battery electric and hybrid vehicles, TREMEC delivers custom performance that differentiates vehicle brands across all platforms.
The ETO GRUPPE develops and produces electromagnetic valves, actuators and sensors for customers all over the world. These components are the most essential part of many vehicles and systems where high-dynamic processes take place and high standards are required in the areas of security, efficiency and environmental sustainability.
Emitech Group, founded in 1989 in France, has become a leader in the fields of engineering and testing for sustainable mobility. With 600 employees and an expected turnover of almost 60 million euros in 2022, the Emitech Group has become a medium-sized company. With 8 subsidiaries in 18 locations, Emitech is able to offer a complete range of services for environmental requirements.
